From Cambridge University Caving Club - CUCC wiki
Jump to: navigation, search
(Batts: Add batts choice and sponsorship note)
(Tasks: Update for battery arrival)
Line 14: Line 14:
 
* Replace PCBs in 7 ('non-makita-charger') packs with own balance-connector board (about 3 hours per batt!): 2 done (April 15)
 
* Replace PCBs in 7 ('non-makita-charger') packs with own balance-connector board (about 3 hours per batt!): 2 done (April 15)
  
* Rebuild 3 new packs. Needs proper tab-welder (Tried soldering last year, and DIY tab-welding - not reliable enough).  
+
* Rebuild 3 new packs. Needs proper tab-welder (Tried soldering last year, and DIY tab-welding - not reliable enough). Sponsored Samsung 25R cells from 18650.uk arrived July 7th. .  
  
* Have bought/acquired parts for battery-tab spot welder (1kW transformer, controller, electrodes). Needs assembling.
+
* Have bought/acquired parts for battery-tab spot welder (1kW transformer, controller, electrodes). Needs assembling. Spot-welder construction is underway. Transformer has been hacked apart. Fat cable acquired. Needs testing + box/mounting.
  
* The 2 new packs will need balance-connector board.
+
* The 2 new packs will need balance-connector board. (optional)
  
 
== Batts ==
 
== Batts ==

Revision as of 15:29, 7 June 2018

Drill battery fettling/improvements

More-idiot-proof drill-battery charging, and upgrading poorly drill packs

Wookey has built proof-of-concept idiot-proof 1hr charger out of makita charger case and B4 35W autocharger They are £9 each. Donor charger bodies off ebay are about £10-13.

B6 50W charger (£11) would charge faster, but is discontinued.

Tasks

  • Test drill batts from 2017. Done (3 need new cells)
  • Build 2 or 3 balancing autochargers. Cannot source female batt connector, so must buy dead makita chargers (about £10 each). 2 more base bodies bought (May 10th) so we have 3 now. Construction has started. 2nd and 3rd B4s have been ordered. 1st charger built (but not working any more - grrr!)
  • Replace PCBs in 7 ('non-makita-charger') packs with own balance-connector board (about 3 hours per batt!): 2 done (April 15)
  • Rebuild 3 new packs. Needs proper tab-welder (Tried soldering last year, and DIY tab-welding - not reliable enough). Sponsored Samsung 25R cells from 18650.uk arrived July 7th. .
  • Have bought/acquired parts for battery-tab spot welder (1kW transformer, controller, electrodes). Needs assembling. Spot-welder construction is underway. Transformer has been hacked apart. Fat cable acquired. Needs testing + box/mounting.
  • The 2 new packs will need balance-connector board. (optional)

Batts

Existing packs mostly use Sony SEUS18650V cells (nominally 1500mAh, 10A) 4Ah pack uses LG DAHD21865 (nominally 2000mAh 25A)

Batt drilling current tested at 26A, so 15A cells needed. UK supplier is https://18650.uk/ Can now get 2 and 2.5Ah 15A cells, so should be able to build 4 or 5Ah capacity packs for ~£40. Nickel tab-strip bought.

Possible 18650 choices:

Seems like 25R are excellent value and 30Q are best high-end cells (cheaper than VTC6 for same performance)

18650.uk are sponsoring us 2 or 3 packs-worth of Samsung 25R or 30Q cells. Yay!


Last update 2018.05.28